• HiLetgo Stackable SD Card and TF Card Shield for Arduino UNO R3 Arduino Mega 2560

  • Features:
    Compatible SD card, Micro SD card and SDHC card supportable.Prototype expand Library support
    Size: 53mm x 47mm
    Weight: 35g
    Pin With SD Card 5V
    VCC ---3v3
    GND--GND
    D13---SD_CLK
    D12-- SD_OUT
    D11---SD_IN
    D10--SD_CS

    1.The shield is missing pins for SCL and SDA
    If you need those two for I2C communication like a display shield, you have to use Analog pin 4 and Analog pin 5

    2. How to build an eeprom programmer to program 2708s for computer?
    A: Set the switch to "3.3"and pressed on, SD cards require 3.3v or you could damage them.
    B:Installed the shield on a Mega 2560 R3 if you need lot of I/O pins forprom programmer,You can plug any shield, in general, into any Arduino as long as you "match" up the pins which are marked.
    C: Installed the shield on Mega,put the shield on the Duemilanove, c...read more
  • Manufacturer: HiLetgo
  • More products from seller: Amazon
  • Your price: USD 8.49
      (as of 2019-06-17 15:10 UTC - More info)
  • As an Amazon Associate we earn from qualifying purchases.
  • Note: Prices are subject to change at anytime
  • Click here to buy at
    Amazon
  • Search for:
  • > UNO Card
  • > HiLetgo UNO
  • > SD TF Card
  • > ARDUINO MEGA
  • > Arduino Uno
  • > HiLetgo Arduino


    This videos may be of interest:

  • Using Mega & Micro SD Card to Write/Read/Remove/List Files & D...
  • Interfacing SD Card Module with Arduino Uno and Arduino Mega 2560 (Dis...
  • How to assemble KKmoon TEC1-12706 Peltier Kit with a HiLetgo W1209 12V...
  • Servo party - Adafruit 16-Channel 12-bit PWM/Servo Shield -- I2C inter...
  • Raspberry Pi zero MakerSpot 4 Port Stackable USB Hub HAT Verison 1 3 &...
  • How to Put an Arduino & SD Card Shield Together
  • Tutorial 20 : HiLetgo Humidity & Temperature Sensor ( DHT11)
  • Hiletgo LNA with 1 meter coax shielded magnetic loop
  • 10 Minute Arduino Project - INA219 Current Sensor
  • HiLetgo Uno R3 Setup and Review
  • TUTORIAL: Quickly getting started with NodeMCU / ESP8266 12E - In 7 mi...
  • Hiletgo - Multimeter DC 6.5-100V 0-20A - Review
  • YMMV - Review of the HiLetgo WEMOS D1 Lite and driving an LED sign
  • How to use W1209 Temperature relay controller and program the thermost...
  • HiLetgo 3.2" IPS TFT LCD Display ILI9481 480X320 36 Pins for Ardu...
  • Review - ESP32 OLED WiFi Kit
  • Interfacing SD Card Module with Arduino Uno and Arduino Mega 2560 (Dis...
  • Using Mega & Micro SD Card to Write/Read/Remove/List Files & D...
  • How to assemble KKmoon TEC1-12706 Peltier Kit with a HiLetgo W1209 12V...
  • Servo party - Adafruit 16-Channel 12-bit PWM/Servo Shield -- I2C inter...
Here some other interesting products:
Here some other interesting products: